| TYPICAL PROPERTIES* | UNIT | ASTM Test |
P3050 | P4300 | P4308 | P5308 | P7408 | P8150 | E4450 | E4308 | E7350 |
| GENERAL Specific Gravity Water Absorption; 24 hrs Mold Shrinkage Flow Cross Flow |
- % 10³ in/in |
D792 D570 D955 |
1.10 0.20 5-7 |
1.15 0.20 5-7 |
1.25 0.20 2-4 |
1.22 0.16 6-9 |
1.10 0.20 5-7 |
1.15 0.20 5-7 |
1.25 0.20 2-4 |
1.22 0.16 6-9 |
1.38 0.08 2-6 |
| Mechanical Tensile Strength at Break Elongation @ Yield Flexural Strength Flexural Modulus Izod Impact (¼") -notched -un-notched |
lb/in² % lb/in² 10³ lb/in² ft-lbs/in ft-lbs/in |
D638 D638 D790 D790 D256 D256 |
7,600 200 12,000 330 1.0 60 |
17,000 3.0 27,000 1,200 1.4 15 |
16,000 2.0 25,000 1,000 2.4 14 |
15,000 3.0 27,000 1,000 1.8 13 |
11,000 2.0 17,000 1,100 1.3 8 |
13,000 3.0 19,000 650 0.6 5 |
27,000 2.0 36,000 1,700 2.1 17.0 |
23,000 2.0 34,000 1,200 1.7 11.0 |
15,000 2.0 22,000 1,100 1.2 10.0 |
| Electrical Dielectric Strength air/.062 Volumn Resisitivity Dielectric Constant @ 1Mhz Dissipation Factor @1Mhz |
V/mil ohm-cm - - |
D149 D257 D150 D150 |
585 3.0E+16 3.0 0.02 |
584 3.0E+16 3.6 0.02 |
680 7.5E+16 3.5 0.02 |
730 1.0E+15 3.6 0.02 |
750 6.0E+16 4.0 0.02 |
600 6.0E+16 3.5 0.02 |
490 1.0E+15 4.0 0.02 |
490 1.0E+15 3.8 0.02 |
530 1.0E+15 3.9 0.02 |
| Thermal Deflection Temp @ 264psi @66 psi |
F F |
D648 D648 |
320 125 |
410 415 |
400 430 |
410 340 |
410 380 |
400 320 |
450 480 |
440 480 |
420 480 |